Riser

- Riser bar with extra bend, but a low rise - Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags - 6061 T6 aluminum

- Roomy riser bar with 25 degrees of backsweep for natural wrist position - Offers comfort without sacrificing control - Shot peened 6061 aluminum - Recommended for Bikepacking and Touring

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

- Riser bar with extra bend and lots of rise - A bar to look at if your bike feels like it has too much reach or too little stack - 6061 T6 aluminum - Recommended for Bikepacking and commuting

The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty. - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

The award-winning vibration damping of One Up Components carbon handlebars now available in aluminum\n - Fine shot peened and anodized 7050-T76 aluminum alloy with glossy logos - Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- 7050 aluminum strong enough for aggressive Trail, Enduro, and Downhill - Gradually tapered bends make this 35mm bar look like a traditional 31.8 bar - True-Sweep geometry eliminates the need to roll the bar forward - 800mm length, easily cut-to-fit any riding style

Made from heat-treated aluminum, tested to Motocross safety standards Marked for custom cut length

- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- Inspired by the classic V-Cross BMX bars from the 80's - Constructed from butted 4130 Cro-Mo - 820mm width, can be cut to 720mm if desired

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed. Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again. Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category. We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status! - The Brendan Fairclough Signature Handlebar - Designed for DH / Enduro / All MTN applications - Developed and tested rigorously for nearly 3 years on the World Cup DH circuit - Incredibly detailed two-tone bead blast and polished ano finish - Brendog signature 8-degree bend / backsweep by 5-degree upsweep - 800mm width - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Mono Heat Treatment Procedure for increased strength - Stiffness for tracking yet compliant for endless chatter and big hits - Wider center bore spacing for unrivaled stability - Designed for maximum ride quality with a 31.8mm bore - Alignment control markers for perfect set up and spacing of your levers - Features measured cut marks and center alignment detail - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 30mm rise (343 grams)

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g

DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars. - Intended use: Enduro and DH

When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams

DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)

The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly. - Aaron Ross signature - Proven 41-Thermal processed 4130 chromoly - Multi-Butted, traditional 7/8" crossbar for strength

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

- Unique multi-use bar with excellent ergonomics - Shot peened 6061 aluminium - 2" forward bend from clamp area negates the need to change stems to make up for the grip area sweep. - 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for race quality at an attainable price. - Material: triple-butted 7050 alloy - Width: 760mm (with cutting marks*) - Rise: 20 and 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 242g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the WCS 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey WCS 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 350g

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

Anyone who victoriously tears off their shirt after a clip, definitely deserves their own bar. Brett Silva has been on a tear lately and we're stoked to be offering the new BRETT bar. - Brett Silva Signature - Laboratory tested and team proven 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection - Guaranteed against manufacturing defects

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - Bar Clamp Diameter: 31.8 mm - Bend: 9 deg - Weight: 290 g

- 6061-T6 polished aluminum handlebar, similar to Torrington North Road - Compatible with MTB-style levers and grips - Clamp diameter: 25.4mm - Width: 21.3" (540mm) - Rise: 2.0" (51mm)

A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike

Developed to offer the same feel and shape as our T1 Carbon handlebars at a sweeter price. 5° Upsweep and 7° Back sweep offers stable comfort for all types of riding. - Available in 20, 30 & 40mm rises - All our aluminum bars are 800m wide

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength

Our Range Handlebar Gen 3 remains focused on ergonomics and comfort, with a width of 800mm and a new 35mm diameter option. With the industry continually trending towards frames with longer reach, our Range Handlebar Gen 3 prioritizes minimizing back discomfort and wrist fatigue so you never feel like you have ol' bird bones on your climbs or descents. PERSONAL PREFERENCE Whether you're an OG or looking for that new new, the new Range Bar now comes in both 31.8mm and 35mm options. WRIST & BACK SAVERS A comfy combination of 10 degree back sweep, 5 degree upsweep and a 30mm rise puts your arms and shoulders in a more relaxed position. LOST WEIGHT, BUT GOT BIGGER? Science? Physics? Engineers are crafty. By maximizing the butting profiles, we removed as much as 25 grams from our previous bar.

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

CrMo with internal taper for best strength-to-weight

CrMo with internal taper for best strength-to-weight

Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Narrow aluminum riser bar for urban use (not recommended for freestyle)