Filter By:

  • Show More Brands
  • Show Fewer Brands

650B

No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - Weight: 27.5-inch, 1710g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Stan's NoTubes Sentry MK3 27.5-inch Front
$319.00
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs.The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
Crank Brothers Cobalt 1 Wheelset (27.5-inch)
$399.00
For more speed in the dirt, throw on a set of Crank Brothers' Cobalt 1 27.5-inch wheels. These lightweight wonders boast tubeless-compatible aluminum rims that keep the weight down to 1,900 grams for the set and they boast machined aluminum hubs with sealed bearings that feel like they'll spin forever. Crank Brothers Twin Spoke technology provides superior strength and stiffness with only 24 spokes per wheel.
DT Swiss XM 1501 Spline ONE 35
$605.00 - $802.00
Fat bikes have opened the eyes to many riders regarding where and how bicycles can be ridden. The XM 1501 SPLINE 35 carries the genes of fat in a lightweight trail package. It is the perfect fit for 2.6-inch tires. Fit to a modern trail bike, it opens up unknown possibilities: That slippery off-camber root section all of a sudden is looking a lot less intimidating. With our industry leading material and manufacturing know-how DT made sure that this wheel, despite it's built-in rowdiness, comes to you in a lightweight and durable package, ready for many all-mountain adventures.
Mavic Crossmax Elite WTS 27.5-inch Rear
$344.95
Years of analyzing wheels as a complete system, and testing them under the most demanding XC race conditions, has proven one thing: the reduced inertia of a superlight rim creates huge performance gains. That’s why Mavic engineered the Crossmax Elite with their lightest aluminum rim, the same one used in the Crossmax Pro. The rim is engineered with ISM 4D (Inter Spoke Milling) technology, which machines the rim between each spoke hole to minimize weight without compromising strength. The rim is wider (22mm internal) and features the UST tubeless system for improved traction, reduced risk of punctures and easier tire mounting. QRM hubs deliver smooth, long-lasting performance, and the fast-engaging ITS-4 freehub enhances the quick and dynamic feel. On the scales, the Crossmax Elite leads its category: 1635g in 27.5, and 1715g in 29. And it’s available in Standard (15x100 and 12x142, convertible to quick release) or Boost (15x110 and 12x148) hub spacing in 27.5 and 29 versions.
Mavic Crossmax 27.5-inch Rear
$201.35
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adapters.
Stan's NoTubes Arch S1
$210.00 - $289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Crest S1
$210.00 - $289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Sentry S1
$210.00 - $289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Arch MK3 27.5 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Race Face Atlas 30 Front Wheel
$414.99
Back to the roots of Race Face. Expanding on their game-changing Atlas line and developed in conjunction with Devinci Global Racing, these wheels are built for the toughest DH tracks on earth. Bring rock gardens to their knees, make step downs bow down, laugh in the face of 20 park laps a day. Pack an Atlas on your next DH trip and you’ll be smiling all the way down the track. HUB - Large oversized flange for improved bracing angle and larger bearings - Hub and bearing system designed and validated for longevity, smoothness, low drag and zero play - Wide bearing stance - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal Width - Tubeless Ready (tape and valves installed) - 4.5mm Offset improves spoke balance and wheel stiffness - 6069 Aluminum construction - Dent and flat resistant bead design
Whisky Parts Co. No.9 40w Front 27.5-inch
$725.00
Whisky No.9 40w Wheels are made to be wide, light, and versatile. Optimized for use with wide trail and plus-sized tires, the No.9 40w rims have a 35mm internal width, feature hookless beads for easy tubeless set up and impact resistance. The No.9 40w wheels offer stiff, lightweight performance gains across the board; these disc brake-specific wheels have a minimalist design and clean aesthetics. - Built with DT Swiss 350 hubs, 32 DT Competition Double Butted Spokes, and brass nipples to maximize performance and reliability - An ideal option for short- to mid-travel mountain bikes, plus tire set ups, or off-road touring rigs - Includes tubeless valves and pre-installed Whisky Tubeless tape with an additional roll for future use - Recommended weight limit: 240lbs - 50psi max tire pressure
Spank Spank 350 27.5-inch Wheelset
$454.30 - $649.00 $649.00 Up To 30% Savings
- Weight optimized wheelset ideal for Trail/AM/Enduro bikes looking for a wide profile - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles
Spank 350 Vibrocore 27.5-inch Wheelset
$559.20 $699.00 20% Savings
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
The Wheel Shop Fratelli FX 25 XXX/Factor DH 27.5-inch Front
$234.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 20mm TA - Hub Spacing 110mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Factor DH - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
The Wheel Shop Fratelli FX 25 XXX/Factor DH 27.5-inch Rear
$354.99
- Position Rear - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 12mm TA - Hub Spacing 157mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Factor DH - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
The Wheel Shop Fratelli FX 25 XXX/Novatec DH82SB 27.5-inch Rear
$234.99
- Position Rear - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 12mm TA - Hub Spacing 150mm/157mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec DH82SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
Race Face Turbine 27.5-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
Race Face Next R 27.5-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Stan's NoTubes Flow MK3 27.5-inch Rear
$370.00
The Flow's legendary history on the World Cup DH circuit, combined with Stan's WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer, more durable, and more lightweight, the Flow MK3 is in a class by itself for all-mountain performance. Flow MK3 wheels include pre-installed tape for tubeless use and Presta valve. - Tubeless ready with rim tape and valves installed - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for 2.35"-2.80" Trail and All-mountain tires
FSA NS 27.5-inch Tubeless Ready Wheelset
$424.99
FSA's NS Wheelset is a tremendous value in an alloy MTB, cyclocross, and gravel bike wheelset with renowned FSA reliability and high-performance technology. Suitable for use on a wide range of price point bikes. - Asymmetric, 25mm deep x 26.1mm wide alloy rim - Tubeless compatible - 148 - 15 x 110mm TA front hub and 12 x 148mm TA - Cartridge bearings (2F+4R) - 2-cross double butted spokes with brass nipples - Artisan built, entirely by hand - Includes tubeless valves (1 pair) and spoke protector - Compatible with cyclocross and gravel bikes
Shimano Deore XT WH-M8000 Race Wheels (27.5-inch)
$253.99 - $537.99
• Model Number : WH-M8000 • Series : DEORE XT • Brake Type : Center Lock Disc • Axle Type : QR • Over Locknut : 100mm • Axle Length : 108mm • QR Skewer Length : QR skewer length: 133mm • Rim Type : Offset rim • Rim Height : 18.8mm • Rim Width : 23.9mm • Recommended Tire : 27.5x1.90-2.25 • Faster acceleration and smoother rotation. • High rigidity and durability. • 28pc butted spokes (F&R). • Offset rim design with better spoke tension balance for durable wheel construction.
Stan's NoTubes Flow S1
$210.00 - $289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Arch MK3 27.5 Front Wheels
$309.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
Stan's NoTubes Crest 27.5 Front Wheels
$295.00
The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes
Stan's NoTubes Flow MK3 27.5 Front Wheels
$309.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Spank Oozy Trail 295 Wheelset
$389.40 $649.00 40% Savings
The SPANK OOZY Trail 295 Wheelset is a real game changer in the world of All Mountain wheelsets. Starting at just 1670g per set, the Trail 295 is considered by many to be the benchmark in lightweight alloy All Mountain wheels, yet its 29.5mm external/25mm internal width and burly OOZY straight pull hub system inspires confidence and begs to be ridden hard. Whether on the EWS Enduro Circuit, or just out smashing your local trails, the OOZY Trail 295 is up to the task. Don't let the OOZY Trail 295's classic refined looks fool you. Inside you'll find SPANK's newest trade mark rim technology. Bead Bite is a revolutionary tubeless enhancing bead hook system, with 6 rows of tiny interlocking teeth in each bead seat. Bead Bite rims and wheels trap the tire bead in place, providing increased tire sidewall integrity, and tire retention properties. Better yet, as the tire bead conforms into the Bead Bite ridges, multiple air seals are created, which improve tubeless performance and reduce burps, even at exceptionally low air pressures. When paired with SPANK's patented Oohbah inverted tube well rim profile, Bead Bite rims offer the highest strength-to-weight and tubeless security available today. SPANK OOZY Trail 295 Wheelsets come in 27.5" and 29" sizes, and are hand-built with exacting precision in a 3-cross, 28H configuration, using triple butted spokes and alloy nipples. Every OOZY Trail 295 rim is manufactured by hand in SPANK's in-house rim facility, Fratelli Industries, using Dynamal, a proprietary new era alloy developed specifically for highly weight-optimized rims. Used by James Doerfling, Jeremy Stowards, Darren Berrecloth and Rob J Heran, the Trail 295's have been tested by the best. Specs: - Hand Built and Trued - Tubeless Ready Rear Hubs: - Standard QR Rear Hub Adapter Kit Incl. - Japanese Bearing Upgrade - Super-Lite CNC Optimized Alloy Freehub Body - Oversized SSL (Single Spoke Length) Flange Design Front Hubs: - 20mm Front Hub Adapter Incl. - Japanese Bearing Upgrade - Oversized SSL Flange Design (adaptable to 20mm)
Spank Oozy Trail 395+ Wheelset
$389.40 - $649.00 $649.00 Up To 40% Savings
Open the door to the plus size revolution, without closing it behind you! SPANK Industries’ OOZY Trail 395+ wheelset is an ultra-wide, hand built and trued wheelset that’s optimized for plus size tires, yet is seamlessly compatible with a wide variety of modern high volume tire options. New 32H straightpull OOZY Trail Hubs with increased engagement and adaptability, were designed with unique over-sized SSL (single spoke length) flanges to deliver enhanced stiffness, durability, and spoke torque retention. Equipped with OOZY Trail 395+ rims, the OOZY Trail 395+ Wheelset combines the strength and durability of Dynamal alloy with the stiffness of SPANK’s iconic Oohbah rim profile. Next generation Bead Bite anti-burp tubeless rim hooks instill confidence and tubeless security even at minimal tire pressures. - Key technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Front Hub (mm): 6 bolt disc mount - Rear Hub (mm): 6 bolt disc mount - Freehub: alloy - Shimano (XD available) - Adapters Included: FRONT: 20 x 110mm REAR: QR x 135mm - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 - Tubeless: Tubeless equipped (tape & valves included) - Discipline: Trail
DT Swiss M 1700 Spline 25
$519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
Page 1 of 5 Next page