Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$13.99
Wire harness and hardware to measure computer data based on the front wheel.
- Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Compatible with: Protege 5.0, 8.0 and 9.0
$14.00
GNT Axact 9/11 Replacement Mounting Bracket
Product description
- Includes mounting bracket and zip ties
$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look
$14.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
$14.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
$15.00
- Perfect for use with Giant Recon Head Light
- Compatible with Go Pro and Sony Action Cam mounts
$15.00
- Perfect for use with Giant Dash L200 and M200 computers
- Compatible with Garmin, Wahoo, Stages and other cycling computers
$15.99
- Superlight computer/light mount fits cleanly underneath the stem
- Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer
- 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$17.49
- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Compatible with some saddle bags
- Mounts to saddle rails
$18.79
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0
$18.95
• When aerobar space is tight, place your computer on top
• Tuck straw on either side for best aerodynamics
• Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately)
• Compatible with most computers, including large screens (sold separately)
• Glass-reinforced nylon
• Weight: 18.5 grams
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter
$19.00
Features
- Mounts underneath Contact SLR Aero Integrated handlebars
- Adjustable length
- Alloy construction
- Hardware included
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Garmin GPS
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$19.99
Light up the road
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base
$19.99
Extension Arm holds tablets at comfortable viewing distance.
- For use with trainers and spin bikes only
- Compatible with all Delta Tablet Holders (sold separately)
- Premium aluminum construction
- Instant attachment and removal
- Rubber coated to protect stem and bars
$19.99
- Control Center computer mount for any 31.8mm handlebar
- Dual clamps provide superior holding power, excellent for GPS units
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
- Replacement bike mounts and other accessories for your Garmin products
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
$19.99
- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately
- Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant)
- Removal key for T25 bolts security bolts included
- Fits discreetly under a water bottle cage or mounted to accessory top tube bolts